ClassicBond Pro

Sprayable PU Adhesive allows the professional Roofing Contractor to securely bond ClassicBond PRO membranes to a range of common flat roof substrates including plywood, OSB3, concrete, PIR tissue faced insulation, steel, existing bitumen layer etc.

Aerosol 1 Skin Irrit. 2 Eye Irrit. 2 Resp. Sens. 1 Skin Sens. 1 Carc. 2 STOT SE 3 STOT RE 2

Features

• 4 x Faster application than roller applied PU
• Reduced applicator strain
• Up to 180m2 coverage/canister (dependent on substrate)
• Read TDS & SDS prior to use
• To be used with ClassicBond PRO only.

A high strength, spray applied contact adhesive, specifically designed, manufactured and tested for EPDM flat roofing installations. Designed for bonding ClassicBond EPDM membrane to horizontal and vertical surfaces. Suitable for a range of surfaces e.g. timber, brickwork, metal and concrete.

Aerosol 1 Skin Irrit. 2 Eye Irrit. 2 STOT SE 3 Aquatic Chronic 2

Features

• Available in 14L & 22L canister (3.5-4.5m2 per litre dependent on substrate), and a 500ml aerosol spray, offering fast and clean application rates
• Read TDS & SDS prior to use

Professional grade polyester backed EPDM membrane, with Pre-applied Seam Tape (PST) to one edge of the roll.

Features

• 3mm thick, 12.2m long x 1.52m wide
• 18.54m² per roll
• BBA and B_ROOF(t4) fire certification

ClassicBond PRO 5L PU Deck Adhesive is a versatile alternative to WBA Adhesive. It can be used to bond ClassicBond PRO membranes to a range of common flat roof substrates including plywood, OSB3, concrete, PIR tissue faced insulation, steel, existing bitumen layer etc.

Acute Tox. 4 Skin Irrit. 2 Eye Irrit. 2 Resp. Sens. 1 Skin Sens. 1 Carc. STOT SE 3 STOT RE 2

Features

• 5L can covers up to 22m2
• Roller Applied
• Read TDS & SDS prior to use
• To be used with ClassicBond PRO only.

Designed for one step cleaning and priming of EPDM membrane and other suitable surfaces prior to the application of ClassicBond Pressure Sensitive (PS) accessories such as 75mm PS Seam Tape, 150mm PS Cover Strip, 225mm Uncured Tape, RUSS, PS Pipe Seals and PS Walkway Pads.

Flam. Liq. 2 Skin Irrit. 2 Eye Irrit. 2 Skin Sens. 1 Repr. 2 STOT SE 3 STOT RE 2 Aquatic Chronic 3

Features

• Available in:
  0.5L and 1L containers
• Read TDS & SDS prior to use

This high strength, solvent free acrylic adhesive is specifically designed to bond ClassicBond EPDM roofing membrane to deck surfaces.

Skin Sens. 1 Aquatic Chronic 3

Features

• Designed to be roller applied to flat roof surfaces
• Available in:
  2.5L (7-10m² coverage)
  5L (14-20m² coverage)
  15L (42-60m² coverage)
• Read TDS & SDS prior to use

A high strength contact adhesive, specifically designed and manufactured for EPDM flat roofing installations. Designed for bonding ClassicBond EPDM membrane to horizontal and vertical surfaces. Suitable for a range of surfaces e.g. timber, brickwork, metal and concrete.

Flam. Liq. 2 Skin Irrit. 2 Eye Irrit. 2 STOT SE 3 Aquatic Chronic 2

Features

• Available in:
  1L (1.5-2m² coverage)
  2.5L (4-5m² coverage)
  5L (8-10m² coverage)
• Designed to be roller applied to the substrate and sheet backing
• Read TDS & SDS prior to use